Silicone is a very common material in daily life. Because of its characteristics of a large temperature range, corrosion resistance, high elasticity, and most importantly, high simulation and high precision, it is a very common material for making various molds. Let's take a look at the cleaning requirements of a Custom Silicone Tray Mold :
1. Silica gel is a soft rubber with a strong adsorption force. Therefore, it must be cleaned immediately after the mold is lowered, and the mold temperature is controlled at about 50 °C for the best effect.
2. Next, spray the silicone mold cleaner on the surface of the mold, wait for 30 seconds, and then wipe the glue stains on the surface of the mold with absorbent cotton.
3. Use mold-washing water to clean the mold, dry it with the air nozzle, and spray it with an anti-rust agent.